|
|
UNDERGRADUATE COURSES
- ECE 233b Electric Circuits II
- ECE 238a Electric Circuits and Electronics I
- ECE 330b Control Systems
- ECE 331a Signal Processing I
- ECE 374b Electromechanics
- ECE 416 Electrical and Computer Engineering Design Project
- ECE 464b Electrical Power Systems II
- ECE 469b Digital Control
GRADUATE COURSES
- ES 630b Control, Instrumentation and Electrical Systems in Nuclear
Power Plants
- ES 521b Fault Tolerant Control Systems
- ES 582b Advanced Control Systems Techniques
- ES 586b Power System Dynamics, Control and Stability
- ES 587b Fault Detection and Isolation in Dynamic Systems
- ES 658b Adaptive Signal Processing and Kalman Filters
- ES 665b Adaptive Control Systems
- ES 666b Modern Control Theory
Supervision
RESEARCH ENGINEER
POST-DOCTORAL FELLOW
- Dr. Xiang Yu
Fault-tolerant
Control with
Application on Aircraft Flight Control
- Dr. Ataul Bari
Wireless Contriol in Nuclear Power
Plants
Go to Top
CURRENT PH. D. STUDENTS
- Ahmad Osgouee
Modeling and Control of Steam Generators
- Jianping Ma
Monitoring and Diagnosis for Nuclear Power Plant Systems
- Hisham Mahmood
DC/AC Inverter Control of Microgrid Application
- Devbratta Thakur
Wind Simulator System Design
-
Drew Rankin
New Class of Safety Control
Systems for Safety Critical Applications and Hardware-in-the-Loop
Simulation
-
Dennis Michaelson
Distributed Smart Storage Elements in Alternative Energy Sources
based Micro-grid
- Quan Wang
Wireless Sensor Applications in Industrial Processes
-
Andrew Moore
Interface for Dispatchable Renewable Energy Sources
* Co-supervising.
Go to Top
CURRENT M. E. Sc. STUDENTS
- Arif Hossain
DCS and Fieldbus devices for control system designs
- Ximing Liu
Distributed Control System in Nuclear Power Plants
- Dhiraj Tata Prasad
Distributed Control Systems in Nuclear Power Plants
- Elizabeth Tomaszewski
PV Control in Microgrid
- Rohit Maitri*
Control System Design & Analysis for Canadian Direct Cycle SCWR
* Co-supervising.
Go to Top
PAST SUPERVISIONS
Research Engineer
Dr. Qingfeng Li (2009 - 2012),
Reliable Control Systems using Distributed Control Systems
(DCS) and Network based Control
Current Occupation – Control & Instrumentation Systems Designer, CANDU
Energy Inc.
Post-Doctoral Fellow
-
Dr. Qingfeng Li (2005 - 2009),
Reliable Control Systems using Distributed Control Systems
(DCS) and Network based Control
Current Occupation - Control & Instrumentation Systems Designer, CANDU
Energy Inc., Mississauga, Canada.
- Zhihao Zhang (2007 - 2008),
Interfacing Fuel Cell based Power Sources to Power Grids
Current Occupation - Project Manager, Magna Powertrain Inc., Toronto,
Canada.
- Dr. Shailendra Kumar Jain (2007),
Micro-grid and
Distributed Power Generation
Current Occupation - Associate Professor, Maulana Azad National
Institute of Technology, India.
- Dr. Weihua Li (1994 - 1997)
Current Occupation - R&D Engineer, Matrikon Inc. Alberta, Canada.
- Dr. Wen Chen (2003-2004), Fault-tolerant Control
Systems
Current Occupation - Assistant Professor, Wayne State University,
USA.
- Dr. Youmin Zhang (1998 – 2003), Design and
Analysis of Fault-tolerant Control Systems
Current Occupation - Associate Professor, Concordia University.
Ph. D.
- PeiweiSun (2012), Dynamic Model Construction &
Control System Design for Canadian SWCR
Current Occupation - Post
Doctoral Fellow at Xi'an Jiaotong University, Xi'an, China.
- Sungwhan Cho (2012), A Stduy for Detection of
Drift in Sensor Measurements
Current Occupation -
- Lingzhi Xia (2012), Development of 3D
Neutronic Kinetic Model & Control for CANDU Reactor
Current Occupation - Safety Analyst, CANDU Energy Inc., Mississauga,
Canada.
- Jingke She (2012), Reactor power upgrading
using FPGA based shutdown systems
Current Occupation - Engineer, CANDU Energy Inc., Mississauga, Canada.
- Hashema Hashemian (2011), Measurement
of Dynamic Temperatures and Pressures in NPPs
Current Position – President of AMS Corp., USA.
- Hooman Javidnia (2009), Modeling and Simulation
of CANDU Reactor Control System
Current Position – I & C Analyst, Atomic Energy of Canada
Limited (AECL), Canada.
- Abdullah Kadri (2009), Low-Power Chirp Signals
for Wireless Data Communication in Industrial Environments
Current Position – Research Scientist, QU Wireless Innovations
Center, Qatar.
- Ervin Sejdic (2007),
Feature Representation Using Energy Concentration in Time-Frequency
Domain for Extraction and Classification
Current Position – Researcher, The University of
Toronto, Canada.
- Zhihao Zhang* (2007), Modelling, Analysis and
Control of Fuel Cell based Micro-grid Power System
Current Position – Project Manager, Magna Powertrain Inc., Toronto,
Canada.
- Ye Jiang* (2007),
Machining Accuracy Enhancement using the Iterative Learning
Control Approach
Current Position – Engineer, Caterpillar,
USA.
- Changchuan Jiang*(2002-),
Fault-tolerant Control of Aircraft
- Adam Rehorn*(2005), Condition Monitoring and Reconfigurable Control of Machine Tools
Current Position – Automation Engineer, TransForm Automotive,
London, ON, Canada.
- Lixuan Lu (2005), Risk-Informed Coordinated
On-line Test and Maintenance for Safety-Critical Standby Instrumentation
and Control Systems
Current Position – Assistant Professor, University of Ontario
(UOIT), Canada.
- Yonghui Xu (2003), Design, Analysis and Implementation
of Fault-Tolerant Control Systems with Application to Electric Machines
Current Position – Engineer, Honeywell Aerospace, Toronto, Canada.
- Mufeed Mahmoud (2001), Stochastic Analysis and
Synthesis of Active Fault Tolerant Control Systems
Current Position - Assistant Professor, University of Massachusetts,
USA.
- Xiaokang Xu* (1999), Application of Singular
Perturbation Models to Long Term Dynamic Stability Studies
Current Position - Senior Staff Consultant, Siemens PTI, USA.
- Krishnat Patil* (1999), Dynamic Compensation
of Electrical Power Systems Using a New BVSI STATCOM
Current Position - Senior Engineer, Siemens PTI, USA.
- Qing Zhao (1999), Fault Tolerant Control System
Design
Current Position - Associate Professor, University of Alberta, Canada.
- Qihua Zhao (1996), Robust Damping Control in
Power Systems
Current Position - Staff Engineer, Honeywell, Canada.Go to Top
M. E. Sc.
- Andrew Moore (2012), Design, Impletementation
and Evaluation of Microgrid
Current Occupation - Ph. D. student in the University of Western Ontario,
London, Canada.
- Shiva Moballegh (2012), Modeling of Partial
Shading & Power Peaks Prediction of PV
Current Occupation - Ph. D. student at University of North
Carolina, USA.
- Mahmood Akkawi (2011), DCS implementation of
inverse dynamic control for SG in NPPs
Current Occupation - Assitant Engineer at Nuclear Safety
Solutions, Toronto, Canada.
- David Anthony Brown (2010), Global optimal
controller for nonlinear systems
Current Occupation - In transition to PhD program.
- Hesam Hosseinzadeh (2010), Modeling and
simulation of a control system for a microgrid
Current Occupation - Test Engineer, GE Digital Energy - Multilin,
Markham, Canada.
- Mohsen Bahramali* (2009), Data Integrity
Protection for Security in Industrial Networks
Current Occupation - Engineer, Thales Rail Signalling Solutions
Inc., Toronto, Canada.
- Yina Zhang* (2009), Numerical Simulation of
Fluid Flow and heat Transfer in Supercritical Water Cooled Reactor
Current Occupation - Test Engineer, Kepstrum Inc., Vaughan,
Canada.
- Drew Rankin (2008), Development of a
Hardware-in-the-loop Simulation Platform for Safety Critical Control
System Evaluation
Current Occupation - Ph. D. student in the University of Western Ontario,
London, Canada.
- Jinhui Zhang (2008), Integration of Model-based
Safety Assessment for Fault-tolerant Flight Control System Design
Current Occupation - Senior Electrical
Engineer, PRO Watts, Inc., Toronto, Canada.
- Carlos O'Donell (2008), A Framework for the
Evaluation of Distributed Control Systems in Industrial Control
Applications
Current Occupation - Engineer, Code Sourcery
Co., USA.
- Zhutian Wang (2008), Control and Operation of a
Microgrid Involving a PEM Fuel Cell through Analysis and Experimentation
Current Occupation - Jr. Electrical Engineer, KSR International Co.,
Ridgetown, Ontario, Canada.
- Yi Cui* (2008),
Active Steer-by-Wire Steering Control Based on Nonlinear Vehicle and
Tire Models
Current Occupation - Engineer, Bombardier,
Montreal, Quebec, Canada
- Jianping Ma* (2008), Fault Detection and
Isolation in Fixed In-core Flux Detectors
Current Occupation - Ph. D. Student in the University of Western Ontario,
London, Canada.
- Dipak Patki (2007), Implementation of Fault-tolerant Control using Distributed Control Systems
- Sungwhan Cho (2006), Safety and Living PSA in
Nuclear Power Plants
Current Occupation - Ph. D. Student in the University of Western Ontario,
London, Canada.
- Yan Wang* (2006), NOx Reduction Control in
Combustion Process
Current Occupation - Engineer, Navistar Engine Group, Chicago, IL,
USA.
- Lee Rehorn (2005), Fault Detection of In-core Neutron Flux Detectors in CANDU Nuclear
Reactors
Current Occupation - Engineer, Novatronics, Canada.
- Ran Peng* (2004), Power System Damping Improvement
with SVC Auxiliary Control
Current Occupation - Assistant Engineer, The Independent Electricity
System Operator, Toronto, Canada.
- Sergio Stevandic (2004), Modeling, Control and
Simulation of a Grid-Connected Fuel Cell Power Plant
Current Occupation - Senior Electrical Engineer, Stantec Consulting,
London, Ontario, Canada.
- Qing Jiang* (2004), Modeling and Simulation of
an Industrial Furnace with Flue Gas Recirculation for NOx Control
Current Occupation - Engineer, AECL, Mississauga, Canada.
- Xiang Li (2003), Design and Implementation of
Sensorless Control of a Permanent Magnet DC Brush Servomotor
Current Occupation - Instructor, Lambton college, Sarnia, Ont., Canada.
- Runling Pan (2003), Design and Prototyping an
Optimal Shock Damping Caster
Current Occupation - Engineer, Caterpillar, Chicago,
USA.
- Guozhong Bao (2002), Fault-tolerant Flow Sharing
Control of Aircraft Engine Bleed Air System
Current Occupation - Engineer, Bombardier, Montreal, QC, Canada.
- Raymond Chokelal (2002), Analysis of Interaction
and Design of a Coordinating Control Scheme for Two SVC FACTs Devices
Current Occupation - Project Engineer, General Motors of Canada, Oshawa,
Canada.
- Adam Rehorn* (2001), Machine Tool Spindle Dynamics:
Identification, Modelling and Effects on Machining Manufacturing Process
Current Occupation - Automation Engineer, TransForm Automotive,
London, ON, Canada.
- Georges Livanos (2000), Heart Sound Analysis
using Time-Frequency Transforms
Current Occupation - Instructor, Humber College, Toronto, Canada.
- Xin Zhang (1998), Non-linear Phenomena and Control
in Power Systems
Current Occupation - Current Occupation - Engineer, Ubicom,Inc. Mountain
View, CA, USA.
- Anthony R. Lithgow* (1997), Collision-free Trajectory
Optimization for Multiple Robotic Manipulators
Current Occupation - Engineer, Toronto, Canada.
- Jason M. Naughton* (1996), A Feed Forward Artificial
Neural Network for Fault Diagnosis of Non-linear Systems
Current Occupation - Engineer, Ryerson University, Canada.
- Rick Harmsen (1995), An Evaluation Procedure
for Fault-tolerant Control Systems
Current Occupation - Computer Engineer, Liberty Inc., London, Canada.
- Fang Jia (1993), Fault Detection, Diagnosis,
and Control System Reconfiguration
Current Occupation - Engineer, Lucent Technologies, NJ, USA.
* Co-supervising.
Go to Top
|
|