‘Science, Action!’ contest puts research in motion
Western News | February 6, 2018
Engineering a solution for brain trauma
Western News | February 1, 2018
Western Engineering’s Haojie Mao is working to understand traumatic brain injury and improve brain health with better protection, diagnostics
Prof engineers a new craft brew
Western News | January 25, 2018
Mechanical & Materials and Electrical & Computer Engineering professor Michael Naish has poured his love for suds into Storm Stayed Brewing Company with business partner, Justin Belanger.
Decoding key materials’ stress loads in new ways
Western News | January 12, 2018
Mechanical and Materials Engineering professor Hamidreza Abdolvand has discovered never-before-seen deformation and stress levels in two technologically important materials – titanium and zirconium – used in the aerospace and nuclear industries.
Professor Jun Yang is looking to push the 'paper' envelope when it comes to printable electronics
Western News | November 23, 2017
Mechanical and Materials Engineering
Mechanical and Materials professor Takashi Kuboki recently began a collaborative research project
Western News | November 23, 2017
Dr. Takashi Kuboki collaborates with
Four scholars named among nation's elite
Western News | September 7, 2017
Dr. Haojie Mao named one of Western’s Canada Research Chairs (CRC).
Professor Price awarded Maurice Fellowship to investigate Smart Contact Lenses for the Early Detection of Glaucoma
Western News | August 30, 2017
MME Professor Aaron Price was recently awarded the Peter C. Maurice Fellowship in Biomedical Engineering to pursue the development of Smart Contact Lenses that harness smart polymer technologies to enable earlier detection of glaucoma in high risk populations.
Western Engineering welcomes four new faculty members
Western Engineering News | July 31, 2017
Dr. Ryan Willing and Dr. Haojie Mao both joined the Department of Mechanical & Materials Engineering July 1, 2017.
Professor Price awarded funding for eLearning innovation
Western News | March 16, 2017
The funding awarded by eCampus Ontario will establish an open badging platform compatible with the Sakai learning management system at Western, well-suited for recognizing skill-based competencies in science, technology, engineering, mathematics and medicine.
Bone anatomy shows one size doesn't fit both
Media Relations | June 29, 2017
Engineering grad student revved up for motorsport
Western News | June 22, 2017
Crossan receives a one-year placement to work at the Renault Formula One Team’s Technical Centre and Infiniti’s European Technical Centre, UK
Young researchers get boost from provincial
Western News | June 7, 2017
Dr. Louis Ferreira, recipient of Early Research Award for "Development of Mechatronic Systems for Joint Replacement Surgical Applications".
Western News | June 7, 2017
Xueliang Sun gives his research a charge by partnering with a Beijing battery research company.
Claire Naudi honoured for going above and beyond
Western Engineering News | June 5, 2017
Western Engineering congratulates Claire Naudi, the 2016 recipient of the Sharon A. Ling Award of Excellence.
Professor Jim Johnson honoured for research contributions
Western Engineering News | April 18, 2017
Western Engineering announced recently that Jim Johnson, a professor in the Department of Mechanical and Materials Engineering, is this year’s recipient of the Engineering Award for Excellence in Research.
Professor Price featured in Scholar’s Showcase Magazine
February 22, 2017
Aspiring author and medical sciences student Elena Kum has featured Dr. Aaron Price's efforts to discover new smart materials for bioprinting in the Winter 2016 issue of Scholar’s Showcase Magazine.
Western Engineering Toboggan Team set to compete in Winnipeg
The Gazette | January 26, 2017
The Western Engineering Toboggan Team (WETT) competes at the annual Great Northern Concrete Toboggan Race (GNCTR) in Winnipeg.
Four new professors set to join Western Engineering faculty
Western Engineering News | November 23, 2016
Dr. Hamid Abdolvand and Dr. Emily Lalone will both join the Department of Mechanical & Materials Engineering (MME) as Assistant Professors effective January 1, 2017.
Andy Sun named among Royal Society elite
Western News | September 7, 2016
Xueliang (Andy) Sun was named named among the 89 new RSC Fellows.
Andy Sun named CAE Fellow
Western News | June 27, 2016
MME professor Andy Sun has been named a Fellow the Canadian Academy of Engineering (CAE) for his distinguished achievements and career-long service to the engineering profession.
Western Engineering students honoured at CME Annual Recognition Night
Western Engineering News | May 19, 2016
Two MME students were recognized for their contributions to the Internship Program at Western Engineering and their demonstrated interest in manufacturing.
Two MME Professors awarded $120,000 over three years in recognition of their leadership and innovative research programs.
MME Entrepreneur awarded $5000 in pitch competition
Media Relations | April 13, 2016
The 2016 installment of the Seed Your Startup entrepreneurial plan and pitch competition has awarded its $5,000 top prize to MME graduate student entrepreneur Alan Kalbfleisch to help launch and grow his venture Pascal Press.
Sun awarded over $500,000 in NSERC Strategic Partnership Grants competition
Western News | March 9, 2016
MME Professor Andy Sun has been awarded $536,800 over three years for this project entitled "Atomically controlled Pt-based electrocatalysts with high stability and ultra-low loading for PEM fuel cells,” which applies nanotechnology to address key challenges in the development of next-generation fuel cells.
MME Instructors Robert Klassen and Walid Altahan have been named to the 2014-2015 USC Teaching Award Honour Roll in recognition of their outstanding achievements in teaching.
MME Professor Anthony Straatman has been elected to represent the Faculty of Engineering in Western’s Faculty Senate from July 1, 2016 to June 30, 2018.
Researchers in Dr. Jun Yang’s group have developed a new silver-based ink that enables users to jot electrical circuits using conventional ballpoint pens.
MME Faculty member, Dr. Aaron Price, works to discover new smart materials for biomechatronic systems.
The Fall Awards Ceremony was held on November 19th, 2015 and 13 students in the MME programs were among the recipients.
Banner Year for Western Formula Racing
Chris Kornas & Sameh Khan | September 20, 2015
Western Formula Racing team reports 2015 as the most successful season ever.
Western News | October 8, 2015
A Council of Representatives from the American Physical Society have elected J.M.
Vanier Celebrates Nation's Finest Graduate Students
Western News | October 8, 2015
Tengyuan Zhang, a graduate student in Mechanical and Materials Engineering, has been named among four Western PhD candidates to receive the Vanier Canada Graduate Scholarship.
Ralph Buchal named a teaching fellow at Western’s Teaching Support Centre
Western News | September 3, 2015
Ralph Buchal, Engineering, will develop tools to engage students in computer-supported collaborative knowledge building in face-to-face, blended and online courses, using a design-based research methodology.
Technology.org | August 4, 2015
Western Engineering News | July 29, 2015
CANCAM 2015: Bringing together world leaders in the field of mechanics
Western Engineering News | July 9, 2015
Formula Racing team stays on track
Western News | June 18, 2015
Western Formula Racing placed first among Canadian universities, and 10th overall.
Western Engineering News | May 26, 2015
What do J.M.
Engineering students apply their education to real-life issues
Western Engineering News | April 17, 2015
Students across Western Engineering capped their final year by completing their fourth-year capstone design projects to showcase their innovative and impactful engineering design work.
Working to cut weight from vehicles
Western Engineering News | March 31, 2015
Jeff Wood, an associate professor in Western’s Department of Mechanical and Materials Engineering, and his research team are trying to take some weight off the shoulders of General Motors Canada employees.
Price brings international experience to teaching, research program
Western Engineering News | February 27, 2015
Aaron Price works in uncharted territory by developing smart materials for industrial applications, while bringing international industry experience to both the classroom and research laboratory.
Two Western Engineering students named among elite future entrepreneurs
Western News | February 12, 2015
James Crocker and Evan Ferguson are part of a group of just 38 students from across Canada chosen to take their entrepreneurial ideas to the next level.
Three Western Engineering researchers tapped for NSERC Strategic Project Grants
Western News | February 12, 2015
Professors Hugo De Lasa, Andy Sun
Mechanical and Materials Engineering Mechatronic System Design Robotics Competition
Western Engineering News | December 3, 2014
Fourth-year Mechanical Engineering students enrolled in the Mechatronic System Design course participated in a competition on Dec. 2, which required teams to design, construct and demonstrate
[View the gallery]
Engineering adds new dimension with 3D printers
Western News | November 27, 2014
If you dream it, you can build it. This is not just a mantra; it has become a reality for Mechanical and Materials Engineering students thanks to a new 3D printing lab.
Western Formula Racing 2014 - A Season of Excellence
by Matthew Crossan | November 18, 2014
Western Formula SAE earns the title of fastest car in Canada.
Striving for lifelong mobility
Western Media Relations | November 7, 2014
Western Engineering professor Jim Johnson is among the researchers of Western's new Cluster of Research Excellence in Musculoskeletal Health.
Western student making a splash on sport's biggest stage
Western News | September 25, 2014
When Gamal Assaad doesn’t have his head buried in his Mechanical Engineering books, you’re likely to find the second-year student in the pool.
Western Aero Design Soars over Competition
by Nathan Curiale & Arun Ravi Shankar | October 8, 2014
Western competes in the 2014 SAE Aero Design East Competition in Fort Worth, Texas.
Western SAE Baja Competition Results
by Doran Avivi | September 14, 2014
Western performs in Baja SAE competion in Kansas.
MME student projects place third in student design poster competition
Western Engineering News | July 2, 2014
Two Mechanical and Materials Engineering undergraduate design projects tied for third place in the Student Design Poster Competition at the Canadian Society for Mechanical Engineering International Congress 2014, held June 1-4 at the University of Toronto.
In memoriam - Doug Shinozaki
Western Engineering News | April 28, 2014
Western Engineering is saddened by the news Mechanical and Materials Engineering Professor Emeritus Doug Shinozaki died on March 23,
Xueliang (Andy) Sun upgraded to Tier I Canada Research Chair
Western News | March 28, 2014
Xueliang (Andy) Sun had his Chair upgraded to Tier I Canada Research Chair in Development of Nanostructured Materials for Energy Storage and Conversion. Sun is developing nanotechnologies to address challenges in use for clean energy.
Western News | March 27, 2014
While you may see a Chevrolet Volt here, or a Nissan Leaf there, the future of the electric car has a way to go when it comes to safety, cost and, especially, performance. However, Engineering professor Andy Sun may have an answer to that final challenge.
Lab findings put patients on sound footing
Western News | March 13, 2014
Imagine being able to look inside the body in motion, and see not only the biomechanics of bones and
Advocate for women in engineering to present Lynda Shaw lecture
Western Media Release | March 11, 2014
Cristina Amon is known as a trailblazer and titan of engineering on both sides of the border. The Dean of the University of Toronto's Faculty of Applied Science & Engineering and Alumni Professor of Bioengineering in Mechanical & Industrial Engineering since 2006, Amon will deliver the 2014 Lynda Shaw Memorial Distinguished Lecture at Western University on Thursday, March 13 at 12:30 p.m. in the Spencer Engineering Building, Room 3109.
Western-led study reveals new surface chemistry in electric vehicle batteries
Western Media Relations | March 5, 2014
In a new study, published in Nature Communications, Western Engineering researcher Xueliang (Andy) Sun and his team of collaborators have shown for the first time ever that carbon coating not only affects conductivity and performance of electric car battery materials, but also alters the chemistry of the battery material's interactive surface.
[Metro News London article]
Three projects tapped for NSERC Strategic Project Grants
Western News | January 16, 2014
Projects led by Abdallah A. Shami, Electrical and Computer Engineering, and Jun J. Yang, Mechanical and Materials Engineering, are among 77 scientific teams receiving more than $43 million in Natural Sciences and Engineering Research Council of Canada (NSERC) programs. The projects are funded through the Strategic Project Grant.
Breakthrough adds a new dimension to printing
Western News| November 21, 2013
Mechanical and Materials Engineering professor Jun Yang along with graduate student Tengyuan Zhang are developing a new approach to printing 3-D materials with easy-to-modify surfaces.
Tony Straatman, 11th president of the CFD Society of Canada
Western Engineering News| November 13, 2013
Mechanical and Materials Engineering professor Tony Straatman was named the 11th president of the Computational Fluid Dynamics (CFD) Society of Canada at the 2012 annual conference in Canmore, Alberta. His term will end in 2014, when the next president will be elected.
Team looks to steel tower power against storm
Western News | October 10, 2013
Ashraf El Damatty, along with Engineering professors Eric Savory, Horia Hangan and Girma Bitsuamlak, eight graduate students and two postdocs, have initiated a research program with Hydro One to mitigate future failures of transmission line structures during those events.
Scientists discover how to build cheaper, more efficient fuel cells
Fuel Cell Works | May 27, 2013
Using the Canadian Light Source (CLS) synchrotron, researchers have discovered a way to create cheaper fuel cells by dividing normally expensive platinum metal into nanoparticles (or even single atoms) for use in everything from automobiles to computers. The research findings, led by Western University’s Xueliang (Andy) Sun and Tsun-Kong (T.K.) Sham, were published recently by Scientific Reports, Nature’s online, open access, multidisciplinary publication: Single-atom Catalysis Using Pt/Graphene Achieved through Atomic Layer Deposition.
Eighteen students will gain hands-on engineering experience around the world this summer
Western Engineering News | May 2, 2013
Eighteen Western Engineering undergraduate students are traveling the world this summer as part of their engineering education at Western.
Jenkyn research team receives CFI funding
Government of Canada | January 15, 2013
The multi-disciplinary team led by Mechanical and Materials Engineering professor Tom Jenkyn and Western researchers David Holdsworth and Trevor Birmingham received $1,342,675 to better understand how joints move under normal conditions and after therapy.
Engineering class builds its own high-speed race car
London Free Press | January 14, 2013
A group of Western students have the wheels turning on plans to build a formula race car from scratch before the end of the semester.
Fraunhofer ICT and University of Western Ontario open research facility in Canada
Composites World | November 10, 2012
The 12,000 ft2 (1,115m2) Fraunhofer Project Centre (FPC) for Composites Research will focus on volume production of lightweight composites for transportation, construction, industrial and aerospace applications.
Western, Fraunhofer celebrate launch of lightweight composites centre
Western News | November 6, 2012
A full house of local, national and international leaders helped Western and Germany's Fraunhofer Society launch the Fraunhofer Project Centre (FPC) for Composites Research at Western at the centres Advanced Manufacturing Park (AMP) location on Monday.
German giant Fraunhofer sets up shop in the Forest City
London Free Press | November 6, 2012
Hanging chads in Florida and U.S. presidential politics may have played a crucial role in how a futuristic research facility landed in London. German giant Fraunhofer shared a stage Monday with politicians and officials at Western University, at a facility that already has big clients in Ford, Chrysler and General Motors.
Harper government supports advanced manufacturing partnerships
Government of Canada News Release | November 5, 2012
Manufacturers in southern Ontario working on the production of innovative lightweight materials will benefit from Western University's new Fraunhofer Project Centre and a centre for commercialization of advanced manufacturing technology, thanks to an investment from the Harper Government.
FedDev pumping $10 million into London Fraunhofer Project Centre
London Free Press | November 5, 2012
More advanced manufacturing research, and the jobs that come with it, are coming to London.A London research centre will get more than $10 million from FedDev Ontario Monday, creating 20 direct research jobs making lightweight manufacturing materials.
CTV News | November 5, 2012
The Fraunhofer Project Centre for Composites Research @ Western is "officially open for business"
Western Engineering News | November 5, 2012
Officially opened Monday, Nov. 5, the Fraunhofer Project Centre for Composites Research @ Western is North America’s latest industry-scale production environment for developing, testing, validating and characterizing new lightweight materials and advanced manufacturing processes. [See photos]
Driving the future: Western, Fraunhofer partnership answers 'The Why'
Western News | November 1, 2012
What brought Tobias Potyra, Fraunhofer Institute of Chemical Technology manager of operations, and his company to Western, and its Advanced Manufacturing Park (AMP), will not only be celebrated next week, but hopefully resonate at the university for years to come.
Fraunhofer Project Centre for Composites Research @ Western
Western University | September 29, 2011
New surgeons use robots to train
London Free Press | August 29, 2012
Practice makes perfect, even with a robotic arm. Western Engineering professors Dr. Louis Ferreira and Dr. James Johnson, co-directors of St. Joseph's Hand and Upper Limb Centre, expect surgeons-in-training to soon be going at cadavers using surgical simulators and computer-guided tracking systems and robotic arms.
Meet the monster press
London Community News | July 11, 2012
It looks like a support tower for a bridge and if dropped, the resulting shockwave could damage nearby buildings. The monstrous Compress Plus 2500T press is the centerpiece of the Fraunhofer Project Centre for Composite Research (FPC), a collaborative research project between the Fraunhofer Institute of Chemical Technology (ICT), a German research and development firm, and Western University.
Western projects get internal boost
Western News | June 21, 2012
Four Western Engineering researchers are one step closer towards moving their work toward commercialization with awards from the Western Innovation Fund. Electrical and Computer Engineering professors Jin Jiang and Jayshri Sabarinathan, and Mechanical and Materials Engineering professors Kamran Siddiqui and Jun Yang are among the award recipients.
Business London | June 2012
When science fiction comes true, the process often lean more toward evolution than big bang. Tobias Potyra, manager of operations at the Fraunhofer Project Centre for Composites Research @ Western and Jeff Wood, associate professor in Mechanical and Materials Engineering, discuss how the research facility will make London an international hub for composites research and development.
Shuhui Sun awarded 2012 Governor General’s Gold Medal
Western Engineering News | June 13, 2012
Western Engineering alumnus Shuhui Sun, PhD'11, has been honoured with the 2012 Governor General’s Gold Medal for graduate study at Western University. These medals recognize students who have completed their graduate studies at the highest level of academic standing.
Building research success
Western Engineering News | June 6, 2012
Western University's Advanced Manufacturing Park is starting to take shape with the ongoing construction of the WindEEE Dome and the Fraunhofer Project Centre for Composites Research @ Western. Watch the progress unfold through photos of the construction.
24th Canadian Materials Science Conference
Western Engineering News | June 5, 2012
Western Engineering is hosting the 24th Canadian Materials Science Conference on Western’s campus from June 5 – 8, 2012. The theme of the conference is: Materials: Atoms to Applications. For more information, please visit the conference website.
Automotive research gets direct injection
Western News | May 31, 2012
Research led by Western Engineering professors Jeffrey Wood, Xianbin Wang and Weiming Shen is among three Western-led projects targeting smarter systems, better materials and safer roadways benefiting from a $22 million investment by Canada's automotive research program, the AUTO21 Network of Centres of Excellence. [Metro News article]
Perfect summer running down perfect storms
Western News | May 24, 2012
This won't be a summer at the beach for Maryam Refan. Three weeks into a summer-long stay in ‘Tornado Alley’, the Mechanical Engineering PhD student plans to spend her holiday chasing tornadoes – all in the name of research.
Western Engineering students trade textbooks for plane tickets this summer
Western Engineering News | May 8, 2012
From the United States, Russia and India to China, Tanzania and Madagascar, several Western Engineering students will be traveling abroad this summer to conduct research and gain hands-on experience. Some of the students will be blogging about their activities.
Johnson appointed Graham King Research Chair at Schulich
Western Engineering News | January 25, 2012
Jim Johnson, director of Biomedical Engineering and professor in Mechanical and Materials Engineering, has been appointed the Graham King Research Chair in the Schulich School of Medicine & Dentistry for a five-year term.