home      resources      multimedia      research      personnel
news      events      safety      links      contact
Publications
Iftekhar Naqavi
Journal Articles

Yilbas BS & Naqvi [sic] IZ , 2006. Laser heating and thermal stresses time exponentially heating
       pulse case. Transactions of the Canadian Society for Mechanical Engineering, 30(1):113-142.
Yilbas BS, Khan O & Naqavi IZ, April 2004. Laser pulse heating and thermal stress
       developments: elastoplastic analysis. Proceedings of the Institution of Mechanical Engineers
       Part B - Journal of Engineering Manufacture,
218(4):375-388.
Naqavi IZ, Yilbas BS & Khan O, December 2003. Laser heating of multilayer assembly and stress
       levels: elasto-plastic consideration. Heat and Mass Transfer, 40(1-2):25-32.
Yilbas BS & Naqvi [sic] IZ, 2003. Laser heating including phase change process and thermal
       stress generation in relation to drilling. Proceedings of the Institution of Mechanical Engineers
       Part B - Journal of Engineering Manufacture
, 217(7):977-991.
Yilbas BS, Naqavi IZ & Shuja SZ, November 2002. Modeling and experimental study into the laser
       assisted nitriding of Ti-6Al-4V alloy. Journal of Manufacturing Science and Engineering -
       Transactions of the ASME
, 124(4):863-874.
Naqavi IZ & Yilbas BS, August 2001. Laser nanosecond pulse heating of surfaces and thermal
       stresses. Numerical Heat Transfer Part A - Applications, 40(3):295-316.
 

Conference Papers

Naqavi IZ, Savory E & Martinuzzi RJ, 2008. Direct numerical simulation of a rectangular surface jet
       - Validation of results. Canadian Society for Mechanical Engineering Forum, 5-8 June, Ottawa,
      Canada.
Naqavi IZ, Savory E & Martinuzzi RJ, 2006. Flow characterization of inclined jet in cross flow for thin
       film cooling via Large Eddy Simulation. Canadian Society for Mechanical Engineering Forum,
       21-24 May, Kananaskis, Canada.   Full paper   Presentation
Naqavi IZ, Savory E & Martinuzzi RJ, 2004. A numerical investigation of laser heating including the
       phase change process in relation to laser drilling. Canadian Society for Mechanical Engineering
       Forum
, 1-4 June, London, Canada.   Full paper

Academic work

Naqavi IZ, 2001. Conduction and non-conduction limited laser heating process-Mathematical
       simulation. MS Thesis, KFUPM, Dhahran, Saudi Arabia.
Naqavi IZ, 1998. Design of a machine for rapid prototyping. BE Final Design Project, NED
       University of Engineering & Technology, Karachi, Pakistan

2004 launch, afm/c.dybenko; 2004-2005 maintenance, j.dybenko; 2006-2010 maintenance, w.lin; 2010-2012 maintenance, k.elliott; 2012 - webmaster, s.ali; updated July 2014