Phone: (519) 661-2111 Ext. 88320
Fax :(519) 850-2436
E-mail: jjiang@uwo.ca
Office TEB 333
Electrical & Computer Engineering
The University of Western Ontario
London Ontario Canada N6A 5B9
|
|
|
|
|
|
 
Research and Publications
 
   
 

CURRENT RESEARCH INTERESTS AND PROJECTS

  • Fault-tolerant control systems for nuclear power plants
  • Fault detection and diagnosis of instrumentation malfunctions in a nuclear power plant
  • Safety and reliability analysis of instrumentation systems in a nuclear power plant
  • Implementation of reliable control systems using Distributed Control Systems (DCS)
  • Reliable control system through communication networks
  • Reliable control strategies for aircraft
  • Reliable servo-drives based on the estimated speed and position
  • Control of Diesel engines and other stationary combustion processes
  • Flexible AC Transmission (FACTs) Controllers
  • Control Strategies for fuel-cell Based Power Plants
  • Non-linear damping of mechanical systems
  • Signal processing Algorithms for automated heart sound analysis and diagnosis
  • Modeling, control, and diagnosis of machine tools



COLLABORATING ORGANIZATIONS

FUNDING AGENCIES



Go to Top


Publications

SELECTED JOURNAL PUBLICATIONS

  • X. H. Huang, Z. T. Wang, and J. jiang, "Control and Load-dispatching Strategies for a Microgrid with a DC/AC Inverter of Fixed Frequency," International Journal of Electrical Power and Energy Systems (Accepted on June 13, 2012).
  • A. Bari, A. Jaekel, J. Jiang and Y. F. Xu, “Design of Fault Tolerant Wireless Sensor Networks Satisfying Survivability and Lifetime Requirements,” Journal of computer Communication, Vol. 35, pp. 320-333, 2012.
  • J. P. Ma, and J. Jiang, "Detection and Identification of Faults in NPP Instruments using Kernel Principal Component Analysis," ASME Journal of Engineering for Gas Turbines and Power , Vol. 34, Iss. 3, 6 pages, Mar. 2012.
  • L. Z. Xia, J. Jiang, H. Javidnia, and J. C. Luxat, ‘Performance evaluation of a 3-D Kinetic model for CANDU reactors in a closed-loop environment,’ Nuclear Engineering and Design, Vol. 243, pp. 76-86, Feb. 2012.
  • S. Jain, J. Jiang, X. H. Huang, and S. Stevandic, "Modeling of Fuel Cell Based Power Supply System for Grid Interface," IEEE Transactions on Industry Applications. (Accepted on January 23, 2012).
  • P. W. Sun and J. Jiang, “Construction and analysis of a dynamic model for a Canadian direct- cycle SCWR for control system studies,” ANS Journal of Nuclear Technology. (Accepted on January 12, 2012).
  • J. K. She and J. Jiang, “Potential improvement of CANDU NPP safety margins by shortening the response time of shutdown systems using FPGA based implementation,” Nuclear Engineering and Design. (Accepted on January 4, 2012).
  • S. W. Cho and J. Jiang, “Detection and estimation of sensor drifts using Kalman filters with a demonstration on a pressurizer,” Nuclear Engineering and Design. (Accepted on October 10, 2011).
  • Q. Li, and J. Jiang, "Evaluation of Foundation Fieldbus H1 Networks for Steam Generator Level Control," IEEE Transactions on Control Systems Technology, Vol. 19, No. 5, pp. 1047-1058, Sept. 2011.
  • M. Akkawi and J. Jiang, “An Inverse Control-Based Set-point Function for Steam Generator Level Control in Nuclear Power Plants,” IEEE Transactions on Nuclear Science (Accepted on July 21, 2011).
  • M. Bahramali, J. Jiang and A. Reyhani-Masoleh, “A Fault Detection Scheme For the FPGA Implementation of SHA-1 and SHA-512 Round Computations;” Springer Journal of Electronic Testing (Accepted on July 12, 2011).
  • L. Z. Xia, and J. Jiang, "CANDU Reactor Space-time Kinetic Model for Load Following Studies," Journal of Engineering for Gas Turbines and Power, Vol. 133, Iss. 5: Paper number 052915, 9 pages, May 2011.
  • J. P. Ma, and J. Jiang, “Applications of Fault Detection and Diagnosis Methods in Nuclear Power Plants: A Review,” Progress in Nuclear Energy, 53(3): pp. 255-266, Apr. 2011.
  • J. K. She, and J. Jiang, "The Speed of the Response of an FPGA-based Shutdown System for CANDU Nuclear Power Plants," Nuclear Engineering and Design, (accepted on Mar. 28, 2011).
  • Y. Zhang, C. Zhang, and J. Jiang, "Numerical Study on the Turbulent Mixing Coefficient for Supercritical Fluids in Subchannels," ANS Nuclear Technology, (accepted on Mar. 28, 2011).
  • P.W. Sun, J. Jiang, and J.Q. Shan, "Construction of dynamic model of CANDU-SCWR using moving boundary method," Nuclear Engineering and Design, (accepted on Feb 18, 2011).
  • Y. Zhang, C. Zhang and J. Jiang, “Numerical Simulation of Fluid Flow and Heat Transfer of Supercritical Fluids in Fuel Bundles,” Journal of Nuclear Science and Technology, Vol. 48, No. 6, pp. 929-935, 2011.
  • Y. Zhang, C. Zhang and J. Jiang, “Numerical Simulation of Heat Transfer of Supercritical Fluids in Circular Tubes Using Different Turbulence Models,” Journal of Nuclear Science and Technology, Vol. 48, No. 3, pp. 366-373, 2011.
  • R. Zhang, C. Zhang and J. Jiang, “Determination of Applicable Input Range for Approximating a Nonlinear FGR Furnace around the Design Point,” Combustion Theory and Modeling, Vol. 15, pp. 89-106. 2011.
  • Q. Li, J. Jiang, D. J. Rankin, “Evaluation of Delays Induced by Profibus PA Networks,” IEEE Transactions on Instrumentation & Measurement, Vol. 60, Iss. 8, pp. 2910-2917, 2011.
  • H. M. Hashemian, J. Jiang and P. Bodine, “Accuracy in Temperature Sensor Response Time Estimation for New Nuclear Reactor Designs,” International Journal of Nuclear Energy Science and Technology, (Accepted in January, 2011).
  • D. J. Rankin and J. Jiang, “A Hardware-in-the-loop Simulation Platform for Verification and Validation of Safety Control Systems," IEEE Transactions on Nuclear Science, (Accepted on Dec. 23, 2010).
  • X. Yu and J. Jiang, “Fault-tolerant Flight Control System Design against Control Surface Impairments using an LPV Approach,” IEEE Transactions on Aerospace and Electronic Systems, (Accepted on Dec. 20, 2010).
  • R. Zhang, C. Zhang and J. Jiang, “A New Approach to Design a Control System for a FGR Furnace Using the Combination of the CFD and Linear System Identification Techniques,” Combustion Theory and Modeling, (accepted Oct. 8 2010).
  • J. Ma, and J. jiang, "Detection and Identification of Faults in NPP Instruments using Kernel Principal Component Analysis," Journal of Engineering for Gas Turbines and Power (Accepted on July 24, 2010).
  • B. Zhang B, J. Q. Shan, and J. Jiang “Numerical analysis of supercritical water heat transfer in horizontal circular tubes,” Progress in Nuclear Energy, 52 (7): 678-684, 2010.
  • B. Zhang, J. Q. Shan, and J. Jiang, “Simulation of heat transfer of supercritical water in obstacle-bearing vertical tubes,” Nuclear Science and Techniques, 21 (4): 241-245, 2010.
  • Hashemian, H.M., and Jiang, J., “Using the Noise Analysis Technique to Detect Response Time Problems in the Sensing Lines of Nuclear Plant Pressure Transmitters.” Progress in Nuclear Energy, Vol. 52, Iss. 4, pp. 367-373, May 2010.
  • Zhihao Zhang, Xinhong Huang, Jin Jiang, and Bin Wu, "A Load-sharing Control Scheme for a Microgrid with a Fixed Frequency Inverter," Electric Power Systems Research, 80(3), pp. 311 - 317, Mar 2010.
  • H. M. Hashemian, and J. Jiang, “A Practical Review of Methods for Measuring the Dynamic Characteristics of Industrial Pressure Transmitters,” ISA Transactions, 49(1): pp. 2-9, Jan. 2010.
  • H. M. Hashemian, and J. Jiang, “Pressure Transmitter Accuracy,” ISA Transactions, 48(4): pp. 383-388, Oct. 2009.
  • X. Yu and J. Jiang, “'Fault-tolerant Flight Control System Design against Control Surface Impairments;” IEEE Trans. on Aerospace and Electronics Systems (Submitted Sept 2009).
  • Abdullah Kadri, Raveendra K. Rao, and Jin Jiang, "Low-Power Chirp Spread Spectrum Signals For Wireless Communication Within Nuclear Power Plants," American Nuclear Society, Nuclear Technology, Vol. 166, pp. 156-169, 2009.
  • Qingfeng Li, Drew J. Rankin, and Jin Jiang, "Evaluations of Foundation Fieldbus H1 Network-induced Delays," IEEE Transactions on Instrumentations and Measurement, Vol. 58, No. 10, pp. 3684-3692, 2009.
  • Hooman Javidnia, Jin Jiang, and Majid Borairi, "Modeling and Simulation of a CANDU Reactor for Control System Design and Analysis," American Nuclear Society Nuclear Technology, Vol. 165, pp. 174-189, 2009.
  • E. Sejdic, I. Djurovic, and J. Jiang, "Time-Frequency Feature Representation Using Energy Concentration: An Overview of Recent Advances," Digital Signal Processing (Elsevier), vol. 19, issue 1, pp. 153-183, Jan. 2009.
  • J. H. Zhang and J. Jiang, “Integration of Model-based Safety Analysis in the Design of Fault-tolerant Flight Control Systems,” IEEE Transactions on Control Systems Technology. (Submitted Dec. 2008).
  • Abdullah Kadri, Jin Jiang, and Raveendra K. Rao, "Performance of Chirp-based Wireless Systems for Industrial Applications," IEEE Transactions on Industrial Electronics. (Submitted, Dec. 2008)
  • J. H. Zhang and J. Jiang, “Analysis and Evaluation of Gyroscope Faults in Flight Control Systems,” International Journal of Systems Science (Submitted Oct. 2008).
  • Abdullah Kadri, Jin Jiang, and Raveendra K. Rao, "Experimental Characterization of Wireless Sensor Networks Against EMI/RFI Regulations for Nuclear Power Plants," IEEE Transactions on Industrial Electronics. (Submitted, Aug. 2008)
  • R. Zhang, C. Zhang, and J. Jiang, “A New Approach for Direct Solution of 2D Heat Transfer Problems in Frequency Domain with Dynamic Boundary Conditions,” International Journal of Nonlinear Sciences and Numerical Simulation, Vo. 9, Issue 3, pp. 249-265, 2008.
  • Y. M. Zhang, J. Jiang, and D. Theilliol, “Incorporating Performance Degradation in Fault Tolerant Control System Design with Multiple Actuator Faulures,” International Journal of Control, Automation, and Systems, vol. 6, no. 3, pp. 327-338, June 2008.
  • Y. M. Zhang and J. Jiang, "Bibliographical Review on Reconfigurable Fault-Tolerant Control Systems," IFAC Annual Review in Control, 2008.
  • I. Djurovic, E. Sejdic, and Jin Jiang, "Frequency based Window Width Optimization for S-transform," AEU International Journal of Electronics and Communications, vol. 62, no. 4, pp. 245-250, April 2008. (Note: The paper was listed in "The ScienceDirect TOP25 Hottest Articles" within the journal for a period from January-June 2008.)
  • E. Sejdic, I. Djurovic, and Jin Jiang, "A Window Width Optimized S-transform," EURASIP Journal on Advances in Signal Processing, vol. 28, 13 pages, 2008.
  • S. W. Cho and J. Jiang, Analysis of surveillance test interval by Markov process for SDS1 in CANDU nuclear power plants, Reliability Engineering and System Safety, Vol. 93, pp.1-13, Jan. 2008.
  • E. Sejdic, LJ. Stankovic, M. Dakovic, and J. Jiang, "Instantaneous Frequency Estimation Using The S-transform," IEEE Signal Processing Letters, vol. 15, pp. 309-312, 2008.
  • Sungwhan Cho and Jin Jiang, "Effect of the Surveillance Test Frequency of SDS1 on the Core Damage Probability," American Nuclear Society Journal of Nuclear Technology, Vol. 161, Iss. 2, pp. 98-107, 2008.
  • Q. Jiang, C. Zhang, and J. Jiang, ‘Sensitivity analysis of a FGR industrial furnace for NOx emission using frequency domain method,’ ASME Trans. on Journal of Energy Resources Technology, Vol. 129, No. 2, pp. 134-143, June 2007.
  • Q. Jiang, C. Zhang and J. Jiang, A CFD assisted control system design with applications to NOx control in a FGR furnace, Combustion Theory and Modelling, 11 (3), pp. 469-481, June 2007.
  • L. Lu and J. Jiang, Joint failure importance for noncoherent fault trees, IEEE Trans. on Reliability, Vol. 57, No. 3, pp. 435-443, Sept. 2007.
  • L. Lu and J. Jiang, Analysis of On-line Maintenance Strategies for k-out-of-n Standby Safety Systems, Reliability Engineering and System Safety, Vol. 92, Iss. 2, pp. 144-155, Feb. 2007.
  • E. Sejdic and J. Jiang, Selective Regional Correlation for Pattern Recognition, IEEE Trans. on  Systems, Man and Cybernetics, Part A: Systems and Humans, Vol. 37, No. 1, pp. 82-93, Jan. 2007.
  • Z.H. Zhang, X. H. Huang, J. Jiang, and B. Wu, An improved dynamic model considering effects of temperature and equivalent internal resistance for PEM fuel cell power modules, Journal of Power Sources, Vol. 161, Iss. 2, pp. 1062-1068, 2006.
  • A. G. Rehorn, E. Sejdic, and J. Jiang, Fault diagnosis in machine tools using selective regional correlation, Mechanical Systems and Signal Processing, Vol. 20, No. 5, pp.1221-1238, July, 2006.
  • R. Zhang, C. Zhang and J. Jiang, A new approach to direct solution of 2D heat transfer problems with nonlinear sources terms in frequency domain, International Journal of Nonlinear Sciences and Numerical Simulation, Vol. 7, pp. 281-284, 2006.
  • J. Jiang, and Y. M. Zhang, ‘Accepting performance degradation in fault-tolerant control systems design,’ IEEE Trans. on Control Systems Technology, Vol. 14, No. 2, pp. 284-292, 2006.
  • R. Peng, R. K. Varma, and J. Jiang, 'New static VAR compensator (SVC) based damping control using remote generator speed signals, International J. of Energy Technology and Policy, Vol. 4, Nos. 3/4, 2006.
  • G. Liu, G. Bao, C. H. Lam, and J. Jiang, A Master-slave approach to aircraft engine bleed flow sharing control, IEEE Trans. on Control Systems Technology, Vol. 13, No. 6, pp. 1100-1106, 2005
  • R. Pan, J. Jiang, and R. Buchal, ‘Design of an Optimal Shock-Damping Isolator with Application to Casters,’ Journal of Sound and Vibration 289 (2006), pp.278-293, 2005.
  • Jin Jiang, ‘Fault-tolerant control systems - an introductory overview,’ Automatica SINCA, Vol. 31, No. 1, pp. 161-174, 2005.
  • W. Chen, and J. Jiang, ‘Fault tolerant control against stuck actuator faults,’ IEE Proceedings Control Theory & Applications, Vol. 152, No. 2, 138-146, 2005. (SCI)
  • W. Chen, and J. Jiang, ‘Fault diagnosis in nonlinear differential - algebraic systems via an iterative learning observer,’ Journal Dynamics of Continuous, Discrete and Impulsive Systems, Vol. 12, No. 5, pp. 809-828, 2005.
  • Adam G. Rehorn, Jin Jiang, Peter E. Orban, and E.V. Bordatchev, ’State-of-the-art methods and results in tool condition monitoring: a review,’ International Journal of Advanced Manufacturing Technology, 26 (7-8) (ISSN: 0268-3768), pp. 693-710, 2005.
  • Maki Midori, Jiang, Jin, and Hagino Kojiro, ‘A stability guaranteed active fault-tolerant control system against actuator failures,’ International Journal of Robust and Nonlinear Control, Vol. 14, No. 12, pp. 1061-1077, 2004.
  • Jiang Jin, and Zhang Youmin, ‘A novel variable-length sliding window blockwise least-squares algorithm for on-line estimation of time-varying parameters,’ International Journal of Adaptive Control and Signal Processing, Vol. 18, No. 6, pp. 505-521, 2004
  • Jin Jiang, and Youmin Zhang, ‘A revisit to block and recursive least squares for parameter estimation,’ International Journal of Computers and Electrical Engineering, Vol. 30, pp.403-416, 2004.
  • Adam G. Rehorn, Jin Jiang, Peter E. Orban, and Evgueni Bordatchev, ‘Modelling and experimental investigation of spindle and cutter dynamics for a high-precision machining center,’ International Journal of Advanced Manufacturing Technology, 24 (11-12), pp. 806-815, 2004.
  • Lixuan Lu, and Jin Jiang, ‘Probabilistic safety assessment for instrumentation and control systems in nuclear power plants: an overview,’ Journal of Nuclear Science and Technology, Vol. 41, No. 3, pp. 323-330, 2004.
  • Weihua Li, and Jin Jiang, ‘Isolation of parametric faults in continuous-time multivariable systems: a sampled data-based approach,’ International Journal of Control, Vol. 77, No. 2, pp. 173-187, 2004.
  • Q. Jiang, C. Zhang, and J. Jiang, ‘An industrial reheating furnace with flue gas recirculation modeled by linear transfer functions,’ Combustion Science and Technology, Vol. 176, No.9, pp. 1464-1473, 2004 (EI)
  • Q. Jiang, C. Zhang, and J. Jiang, ‘Reduction of NOx in a regenerative industrial furnace with the addition of methanol in the fuel,’ ASME Trans. on Journal of Energy Resources Technology, Vol. 126, pp. 159-165, 2004 (EI)
  • Y. M. Zhang, and J. Jiang, 'Fault-tolerant control system design with explicit consideration of performance degradation,' IEEE Trans. on Aerospace and Electronics Systems, Vol. 39, No. 3, pp. 838-848, 2003.
  • M. Mahmoud, J. Jiang, and Y. M. Zhang, 'Stabilization of active fault-tolerant control systems with imperfect fault detection and diagnosis,' Journal of Stochastic Analysis and Applications, Vol. 21, No. 3, pp. 673-701, 2003.
  • Y. M. Zhang, and J. Jiang, 'An active fault-tolerant control system against partial actuator failures,' IEE Proceedings - Control Theory and Applications, Vol. 149, No. 1, pp. 95-104, 2002.
  • M. Mahmoud, J. Jiang, and Y. M. Zhang, 'Stochastic stability analysis for fault-tolerant control systems with multiple failure processes,' International Journal of Systems Science, Vol. 33, No.1, pp. 55-65, 2002.
  • M. Mahmoud, J. Jiang, and Y. M. Zhang, 'Stochastic stability analysis of fault-tolerant control systems in the presence of noise,' IEEE Trans. on Automatic Control, Vol. 46, No. 11, pp. 1810-1815, 2001.
  • Y. M. Zhang, and J. Jiang, 'Integrated active fault-tolerant control using IMM approach,' IEEE Trans. on Aerospace and Electronics Systems, Vol. 37, No. 4, pp. 1221-1235, 2001.
  • Y. M. Zhang and J. Jiang, 'Integrated design of reconfigurable fault tolerant control systems,' AIAA Journal of Guidance, Control and Dynamics, Vol. 24, No. 1, 133-136, 2001.
  • X. K. Xu, R. M. Mathur, J. Jiang, G. J. Rogers, and P. Kundur, 'Modelling Effects of System Frequency Variations in Induction Motor Dynamics Using Singular Perturbations,' IEEE Trans. on Power Systems. Vol. 15, No.2, pp.764-770, 2000.
  • J. Jiang and Q. Zhao, 'Design of Reliable Control Systems Possessing Actuator Redundancy,' AIAA Journal of Guidance, Control and Dynamics, Vol. 23, No. 4, pp. 709-718, 2000.
  • K. V. Patil, R. M. Mathur, J. Jiang, and S. H. Hosseini, 'Distributed System Compensation using a New Binary Multilevel Voltage Source Inverter,' IEEE Trans. on Power Delivery, Vol. 14, No.2, pp. 459-464, 1999.
  • Q. Zhao, and J. Jiang, 'A TCSC Damping Controller Design Using Robust Control Theory,' International Journal of Electrical Power & Energy Systems, Vol. 20, No.1, pp.25-33, 1998.
  • K. V. Patil, J. Senthil, J. Jiang, and R. M. Mathur, "Application of STATCOM for Damping Torsional Oscillations in Series Compensated AC Systems," IEEE Trans. on Energy Conversion, Vol. 13, No. 3, pp. 237-243, 1998.
  • Q. Zhao, and J. Jiang, 'Reliable State Feedback Control System Design against Actuator Failures,' Automatica, Vol. 34, No. 10, pp. 1267-1272, 1998.
  • X. K. Xu, R.M. Mathur, J. Jiang, G.J. Rogers, and P. Kundur, ‘Modeling of generators and their controls in power system simulations using singular perturbations,’ IEEE Trans. on Power Systems, Vol. 13, No. 1, pp. 109-114, 1998
  • Q. Zhao, and J. Jiang, 'Robust SVC Controller Design for Improving Power System Damping,' IEEE Trans. on Power Systems, Vol. 10, No. 4, pp. 1927-1932, 1995.
  • Q. Zhao and J. Jiang, 'Robust Controller Design for Generator Excitation Systems,' IEEE Trans. on Energy Conversion, Vol.10, No. 2, pp. 201-209, June, 1995.
  • J. Jiang, 'Design of an Optimal Robust Governor for Hydraulic Turbine Generating Units,' IEEE Trans. on Energy Conversion, Vol. 10, No. 1, pp.188-194, March, 1995.
  • J. Jiang and F. Jia, 'A robust fault diagnosis scheme based on signal modal estimation,' International Journal of Control, Vol. 62, No.2, pp.461-475, 1995.
  • J. Jiang, 'Optimal Gain Scheduling Controller for a Diesel Engine,' IEEE Control Systems Magazine, Vol. 14, No.4, pp. 42-48, August, 1994.
  • F. Jia and J. Jiang, 'Fault Diagnosis in DC Servo Systems- A Comparative Study of Three Fault Diagnosis Schemes,' European Journal on Fault Diagnosis and Safety in Automation, Vol. 4, No. 3, pp. 357-374, 1994.
  • J. Jiang, 'Design of Reconfigurable Control Systems based on Eigenstructure Assignment,' International Journal of Control, Vol. 59, No. 2, pp. 395-410, 1994.
  • J. Jiang, 'Preservation of Positive Realness under Discretization,' Journal of the Franklin Institute, pp. 721-734, 1993.
  • J. Jiang and R. Cook, 'A Fast Parameter Tracking RLS Algorithm with High Noise Immunity," IEE Electronic Letters, Vol. 28 No. 22, pp. 2043-2045, 1992 (short paper).
  • R. Doraiswami, and J. Jiang, ‘An intelligent sensor to monitor power system stability, performance and diagnose failures,’ IEEE Trans. on Power Systems, Vol. 5, pp. 1432-1438, 1990

Go to Top

BOOK AND RESEARCH MONOGRAPH

  • A. Bari, J. Jiang, and A. Jaekel, Fault tolerant Industrial Wireless Sensor Networks, CRC press, 2012 (Accepted book chapter).
  • J. M. Zhang, and J. Jiang, Control of Nuclear Reactors, Atomic Energy Press, 2009 (Book, in Chinese).
  • E. Sejdic, Jin Jiang, Patter Recognition, Vienna, Austria: I-Tech Education and Publishing, 2008, ch. Pattern Recognition in Time-Frequency Domain: Selective Regional Correlation and Its Applications, accepted, to be published in Oct. 2008.
  • J. Jiang, Fault-tolerant Control System Design and Analysis (In preparation), Five chapters written.
  • M. M. Mahmoud, J. Jiang and Y. M. Zhang, Active Fault Tolerant Control Systems: Stochastic Analysis and Synthesis, (ISBN 3-540-00318-5), Springer-Verlag, 2003.
  • J. Jiang, Comprehensive Handbook on Electrical Engineering, (Area Editor) CRC, 1999.

Go to Top

SELECTED CONFERENCE PUBLICATIONS

  • Hisham Mahmood, Dennis Michaelson, Jin Jiang, "Control Strategy for a Standalone PV/Battery Hybrid System", 38th Annual Conference of the IEEE Industrial Electronics Society (IECON2012), Montreal, PQ, 25-28 October 2012. (Accepted on June 19, 2012).
  • S. Moballegh, and J. Jiang, "Partial Shading Modeling of Photovoltaic System with Experimental Validations," The 2011 IEEE Power & Energy society General Meeting, Detroit, US, July 24-27, 2011.
  • B. Zhang, J. Shan, and J. Jiang, “Turbulent mixing model applicable to supercritical condition,” Proceedings of the 5th International Symposium on SCWR, Vancouver, British Columbia, Canada, March, 2011.
  • B. S. Wang, D. Q. Wang, J. M. Zhang and J. Jiang, “Review of Passive Safety Control Systems in NPP,” International Topical Meeting on Nuclear Plant Instrumentation, Control and Human Machine Interface Technologies (NPIC&HMIT 2010), Las Vegas, Nov. 7 – 11, 2010.
  • M. Akkawi, and J. Jiang, “An Inverse Control-Based Set-point Function for Reducing Water Level Fluctuations in Steam Generators,” International Topical Meeting on Nuclear Plant Instrumentation, Control and Human Machine Interface Technologies (NPIC&HMIT 2010), Las Vegas, Nov. 7 – 11, 2010.
  • D. Rankin and J. Jiang, “Effects of the in-the-loop interfaces on hardware-in-the-loop simulation of NPP processes,” International Topical Meeting on Nuclear Plant Instrumentation, Control and Human Machine Interface Technologies (NPIC&HMIT 2010), Las Vegas, Nov. 7 – 11, 2010.
  • S. Cho and J. Jiang, “A Method for Detection of Drifts in Sensors Using Kalman Filter,” International Topical Meeting on Nuclear Plant Instrumentation, Control and Human Machine Interface Technologies (NPIC&HMIT 2010), Las Vegas, Nov. 7 – 11, 2010.
  • P. W. Sun and J. Jiang, “Thermal-hydraulic Modeling of CANDU-SCWR and Linear Dynamic Model Development,” Proceeding of International Conference on Nuclear Engineering (ICONE) 18, Xi'an, China, May, 17- 21, 2010.
  • L. Z. Xia and J. Jiang, “CANDU Reactor Space-Time Kinetic Modeling for Load Following Control,” Proceeding of International Conference on Nuclear Engineering (ICONE) 18, Xi'an, China, May, 17- 21, 2010.
  • J. P. Ma and J. Jiang, “Fault Detection and identification in NPP Instrument using Kernel Principal Componment Analysis,” Proceeding of International Conference on Nuclear Engineering (ICONE) 18, Xi'an, China, May, 17- 21, 2010.
  •  P. W. Sun and J. Jiang, “Modelling and Simulation of Dynamic Characteristics of CANDU-SCWR,” 2nd Canada-China Joint Workshop on Supercritical Water-cooled Reactor (CCSC-2010), April 25-28, 2010, Paper No. 76, Toronto, Canada.
  • H. Hosseinzadeh, X. H. Huang, and J. Jiang, 'Simulation of Micro-sources in a Small Scale Microgrid,' Proc. of 2009 IEEE PES General Meeting, Calgary, Alberta, July 26-30, 2009.
  • J. Ma, and J. Jiang, “Applications of Fault Diagnosis in Nuclear Power Plants: An Introductory Survey,” Proceedings of the 7th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes (SAFEPROCESS 2009), pp. 1150-1161, Barcelona, Spain, June 30-July 3, 2009.
  • A. Kadri, J. Jiang, and R. K. Rao, "Chirp-based Wireless Sensor Networks and Their Potential Applications in Nuclear Power Plants," 6th American Nuclear Society International Topical Meeting on Nuclear Plant I&C, and Human-Machine Interface Technologies NPIC&HMIT 2009, Knoxville, Tennessee, Apr. 5-9, 2009.
  • J. Ma, and J. Jiang, “A Fault Detection and Isolation Technique for In-Core Flux Detectors,” Proceedings of the Sixth American Nuclear Society International Topical Meeting on Nuclear Plant Instrumentation, Control, and Human-Machine Interface Technologies (NPIC & HMIT 2009), Knoxville, Tennessee, April 5-9, 2009.
  • S. W. Cho, and J. Jiang, “Drift Detection of Sensors in the PHT System of CANDU-6 Plants using Analytic Redundancy,” NPIC & HMIT 2009, Knoxville, Tennessee, April 5-9, 2009.
  • J. K. She, and J. Jiang, “Application of FPGA to Shutdown System No. 1 in CANDU,” NPIC & HMIT 2009, Knoxville, Tennessee, April 5-9, 2009.
  • D. J. Rankin, J. K. She, and J. Jiang, "Evaluation of Safety PLCs and FPGAs for Shutdown Systems in CANDU Nuclear Power Plants," 3rd International Symposium on Future I&C for Nuclear Power Plants (ISOFIC2008), Paper ID: 148, Harbin, Heihongjiang, China, 2008.
  • Abdullah Kadri, and J. Jiang, "Experimental Evaluation of Wireless Sensor Networks for Potential Applications in Nuclear Power Plants," 3rd International Symposium on Future I&C for Nuclear Power Plants (ISOFIC2008), Harbin, Heihongjiang, China, 2008.
  • S. Jain, J. Jiang, X. H. Huang, and S. Stevandic, “Single Stage Power Electronic Interface for A Fuel Cell Based Power Supply System,” Proc. of IEEE Power Conference 2007 on Renewable and Alternative Energy Resources, Montreal, Quebec, Oct. 25-26, 2007.
  • D. J. Rankin, and J. Jiang, "Hardware-in-the-loop Simulation using Tricon v9 Safety PLC," Proc. of the 16th International Conference on Nuclear Engineering (ICONE), Orlando, Florida, May 11-15, 2008.
  • Q. F. Li, D. J. Rankin, and J. Jiang, "Evaluation of Distributed Control Systems and Network-based Control for Nuclear Power Plants," International Atomic Energy Agency (IAEA )Technical Meeting on Instrumentation and Control Systems, Toronto, Ontario, Oct. 28 - Nov. 3, 2007.
  • S. Jain, J. Jiang, X. H. Huang, and S. Stevandic, 'Single stage power electronic interface for a fuel cell based power supply system,' Proc. of IEEE Power Conference 2007 on Renewable and Alternative Energy Resources, Montreal, Quebec, pp. 201-206, Oct. 25-26, 2007.
  • A. T. Moore, and J. Jiang, 'Impact of large-scale distributed energy sources under government incentive programs: an example,' Proc. of IEEE Power Conference 2007 on Renewable and Alternative Energy Resources, Montreal, Quebec, pp. 224-229, Oct. 25-26, 2007.
  • Z. T. Wang, X. H. Huang, and J. Jiang, 'Design and implementation of a control system for a microgrid involving a fuel cell power module,' Proc. of IEEE Power Conference 2007 on Renewable and Alternative Energy Resources, Montreal, Quebec, pp. 207-212, Oct. 25-26, 2007.
  • H. Javidnia, and J. Jiang, ‘MATLAB/SIMULINK platform for simulation of  CANDU reactor control system,’ Proc. of 28th Canadian Nuclear Society Conference & 31st CNS/CAN Student Conference, St. John, New Brunswick, June 3-6, 2007.
  • A. Osgouee and J. Jiang, ‘Robust model-based steam generator level control in nuclear power plant,’ Proc. of 28th Canadian Nuclear Society Conference & 31st CNS/CAN Student Conference, St. John, New Brunswick, June 3-6, 2007.
  • Q. F. Li, J. Jiang and D. J. Rankin, ‘Modeling of effects of a Foundation Fieldbus H1 network in network-based control system,’ Proc. of 28th Canadian Nuclear Society Conference & 31st CNS/CAN Student Conference, St. John, New Brunswick, June 3-6, 2007.
  • S. W. Cho and J. Jiang, ‘A strategy for determination of test intervals of k-out-of-n multi-channel systems,’ Proc. of 28th Canadian Nuclear Society Conference & 31st CNS/CAN Student Conference, St. John, New Brunswick, June 3-6, 2007.
  • Ervin Sejdic, Igor Djurovic, and Jin Jiang, ‘S-transform with frequency dependent Kaiser window,’ 2007 IEEE International Conference on Acoustics, Speech, and Signal Processing (IEEE Cat. No. 07CH37846), pp. 1165-1168, Honolulu, April 15-20, 2007.
  • Q. F. Li, and J. Jiang, ‘Performance evaluation of network-based steam generator level control,’ Proc. of ANS 5th International Topical Meeting on Nuclear Plant Instrumentation, Controls, and Human Machine Interface Technology (NPIC&HMIT 2006), pp. 495-502, Albuquerque, New Mexico, Nov. 12-16, 2006.
  • A. Kadri and J. Jiang, ‘Potential applications of Fieldbus and wireless technologies in nuclear power plants,’ Proc. of ANS 5th International Topical Meeting on Nuclear Plant Instrumentation, Controls, and Human Machine Interface Technology (NPIC&HMIT 2006), pp. 1326-1334, Albuquerque, New Mexico, Nov. 12-16, 2006.
  • S. W. Cho, and J. Jiang, 'Comparison of the unavailability using FT model and Markov model of SDS1,' Proc. of ANS 5th International Topical Meeting on Nuclear Plant Instrumentation, Controls, and Human Machine Interface Technology (NPIC&HMIT 2006), Nov. 12-16, 2006.
  • J. Jiang, 'Nuclear I&C research and education under UNENE program,' Proc. of ANS 5th International Topical Meeting on Nuclear Plant Instrumentation, Controls, and Human Machine Interface Technology (NPIC&HMIT 2006), Nov. 12-16, 2006.
  • P. Rakovic, E. Sejdic, LJ. Stankovic, and J. Jiang, "Time-Frequency Signal Processing Approaches with Applications to Heart Sound Analysis," in Proc. of 33rd Computers in Cardiology Conference, pp. 197-200, Valencia, Spain, Sept. 17-20, 2006.
  • J. H. Zhang, and J. Jiang, “Modeling of Rate Gyroscopes with Consideration of Faults,” in Proceedings of 6th IFAC Symposium on Fault Detection Supervision and Safety for Technical Process, pp. 193-198, 2006.
  • J. H. Zhang, and J. Jiang, “Modeling of Vertical Gyroscopes with Consideration of Faults,” in Proceedings of 6th IFAC Symposium on Fault Detection Supervision and Safety for Technical Process, pp. 187-192, 2006.
  • X. H. Huang, Z. H. Zhang, and J. Jiang, ‘Fuel cell technology for distributed generation: An overview,’ Proceeding of IEEE International Symposium on Industrial Electronics, Vol. 2, pp. 1613-1618, Montreal, July 9-12, 2006.
  • Z. H. Zhang, X. H. Huang, J. Jiang, and B. Wu, ‘Dynamic characteristics of a micro-grid
    involving a PEM fuel cell power module,’ Proc. of IEEE International Symposium on Industrial Electronics, Vol. 3, pp. 2030-2034, Montreal, July 9-12, 2006.
  • H. Javidnia, and J. Jiang, ‘MATLAB/SIMULINK model of CANDU reactor  for control studies,’ Proc. of 27th Annual Conference of the Canadian Nuclear Society and 30th Canadian Nuclear Society - Nuclear Energy A World of Service to Humanity, Toronto, June 11-14, 2006.
  • S. W. Cho, and J. Jiang, ‘Determination of the optimal surveillance test interval for shutdown system number 1,’ Proc. of 27th Annual Conference of the Canadian Nuclear Society and 30th Canadian Nuclear Society - Nuclear Energy A World of Service to Humanity, Toronto, June 11-14, 2006.
  • A. Kadri*, ‘Survey of Networked Control Systems and Their Potential Applications in Nuclear Power Plants,’ Proc. of 27th Annual Conference of the Canadian Nuclear Society and 30th Canadian Nuclear Society - Nuclear Energy A World of Service to Humanity, Toronto, June 11-14, 2006. (*-PhD student supervised by Dr. J. Jiang)
  • C. Jr. O’donell, J. Jiang, and Q. F. Li, ‘Evaluation of a distributed control system for potential applications in nuclear power plants,’ Proc. of 27th Annual Conference of the Canadian Nuclear Society and 30th Canadian Nuclear Society - Nuclear Energy A World of Service to Humanity, Toronto, June 11-14, 2006.
  • Y. Zhang and J. Jiang, ‘Fault diagnosis using a variable-length sliding window blockwise. Least-Squares parameter estimation approach,’ Proc. of 1st Workshop on Networked Control System and Fault Tolerant Control, Ajaccio, France, 2005.
  • S. Cho and J. Jiang, ‘Design of Surveillance Test Interval for SDS1 in CANDU Nuclear Power Plants using a State Transition Model,’ International Symposium on the Future I&C for Nuclear Power Plants, pp. 297-305, Gyungnam, Korea, Nov. 1-4, 2005.
  • Y. Wang, C. Zhang, and J. Jiang, “A numerical study of the effect of multi-injection strategy on NOx reduction in DI diesel engines,” Proc. 2005 ASME Summer Heat Transfer Conference, San Francisco, CA, July 17-22, Fire and Combustion, Paper No. HT2005-72741 , 2005.
  • Changchuan Jiang, Guangjun Liu, and Jin Jiang, ‘A self-validating algorithm for hot thermistor constant differential temperature air flow sensor,’ Proc. of 2005 IEEE Conference on Control Applications, pp. 669-674, Toronto, Canada, Aug. 29-31, 2005.
  • Y. M. Zhang, J. Jiang, Z. Yang, and A. Hussain, “Managing performance degradation in fault tolerant control systems,” In: Proc. of 16th IFAC World Congress, Prague, Czech Republic, July 4-8, 2005.
  • Z. H. Zhang, J. Jiang, and Bin Wu, ‘Construction of a dynamic model for a PEM power module with applications to distributed power generation,’ Proc. of the International Green Energy Conference, Paper No. IGEC-1-086, June 12-16, Waterloo, 2005.
  • L. Lu and J. Jiang, 'Unavailability, Spurious Operation and Cost Analysis of Periodically Tested and Maintained Standby K-out-of-n Systems,' 13th International Conference on Nuclear Engineering, Beijing, China, May 2005.
  • L. Rehorn and J. Jiang, 'Analytical Redundancy for CANDU Nuclear Power Plants using a Modified Dedicated Observer,' 13th International Conference on Nuclear Engineering, Beijing, China, May 2005.
  • Guangjun Liu, Guozhong Bao, Chun Ho Lam, and Jin Jiang, ‘A master-slave approach to air craft engine bleed flow sharing control,’ Proc. Of the 2004 American Control Conference, pp. 5716-5721, Boston, Massachusetts, June 30 - July 2, 2004.
  • Ervin Sejdic, and Jin Jiang, ‘Comparative study of three time-frequency representations with applications to a novel correlation method,’ Proc. of IEEE International Conf. on Acoustics, Speech, and Signal Processing (ICASSP), Vol. 2, pp. 633-636, Montreal, May 17-21, 2004.
  • C. O’Donell and J. Jiang, ‘A Framework for Evaluating Distributed Control Systems in Nuclear Power Plants,’ CNS Sixth International Conference on Simulation Methods in Nuclear Engineering, Montreal, Quebec, October 12-15, 2004.
  • L. Lu, and J. Jiang, ‘A risk-informed on-line test and maintenance framework for redundant instrumentation and control systems in nuclear power plants, Proc. of 12th International Conference on Nuclear Engineering (ICONE12-49170), Arlington, Virginia USA, April 25–29, 2004.
  • Y.M. Zhang, and J. Jiang, ‘Bibliographical review on reconfigurable fault-tolerant control systems,’ Proc. of IFAC DAFEPROCESS 2003, Washington DC, U.S.A, pp 265-276, 2003.
  • J. Jiang, and Y.M. Zhang, ‘Fault diagnosis and reconfigurable control of a pressurizer in a nuclear power plant,’ Proc. of IFAC DAFEPROCESS 2003, Washington DC, U.S.A, pp 1095-1100, 2003.
  • Peter E. Orban, Jin Jiang, and Ye Jiang, ‘CNC interpolator architecture for on-line error correction,’ Proc. of SPIE Conf. on Intelligent Manufacturing, Vol. 5263, pp.50-56, Providence, RI U.S.A, Oct. 29-30, 2003
  • Adam G. Rehorn, Peter Orban, and Jin Jiang, ‘Vibration-based machine condition monitoring with attention to the use of time-frequency methods,’ Proc. of SPIE Conf. on Intelligent Manufacturing, Vol. 5263, pp.10-21, Providence, RI U.S.A, Oct. 29-30, 2003
  • R.S.C. Chokelal, and J. Jiang, ‘Interaction of two static VAR compensators in close electrical proximity,’ IFAC Symposium on Power Plants & Power System Control, Sept. 9-18, Korea, 2003.
  • S. Stevandic, and J. Jiang, ‘Stand-alone, reduced-order model and control of a grid-connected fuel cell power plant,’ IEEE Annual Meeting, pp. 679-686, July 13-17, Toronto, 2003.
  • J. Jiang, and Y.M. Zhang, ‘Fault diagnosis and reconfigurable control of a pressurizer in nuclear power plants,’ The 5th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, Washington DC, U.S.A, June 9-11, 2003.
  • Y.M. Zhang, and J. Jiang, ‘Bibliographical review on reconfigurable fault-tolerant control systems,’ The 5th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, Washington DC, U.S.A, June 9-11, 2003.
  • Q. Jiang, C. Zhang, and J. Jiang, ‘A sensitivity study of NOx emission to the change in the input variables of a FGR industrial furnace,’ Proc. of the ASME Summer Heat Transfer Conf., Vol. 2003, pp. 95-102, Las Vegas, NV U.S.A, Jul. 21-23, 2003 (EI)
  • Q. Jiang, C. Zhang, and J. Jiang, ‘Dynamic model construction of an industrial flue gas recirculation (FGR) furnace for real-time NOx emission control,’ Proc. of the 2003 International Joint Power Generation Conference, pp. 763-770, Atlanta, GA U.S.A, Jun. 16-19, 2003. (EI)
  • J. Jiang and Y. M. Zhang, 'Graceful performance degradation in active fault-tolerant control systems,' Proc. of 15th IFAC World Congress on Automatic Control, Barcelona, Spain, July, 2002.
  • Y. M. Zhang and J. Jiang, 'Design of Restructurable active fault-tolerant control systems,' Proc. of 15th IFAC World Congress on Automatic Control, Barcelona, Spain, July, 2002.
  • M. Mahmoud, J. Jiang and Y. M. Zhang, ‘Stability of fault-tolerant control systems driven by actuators with saturations,’ ' Proc. of 15th IFAC World Congress on Automatic Control, Barcelona, Spain, July, 2002.
  • E. Sejdic, and J. Jiang, "Time-Frequency Analysis of the Heart Sounds," in Proc. of 2002 ECEGRS, London, Ontario, Canada, May 15-17, 2002, pp. 5-9.
  • Midori Maki, Jin Jiang, and Kojiro Hagino, ‘A stability guaranteed active fault-tolerant control system against actuator failures,’ Proc. of the 40th IEEE Conf. on Decision and Control, pp. 1893-1898, Orlando, U.S.A, Dec., 2001.
  • M. Mahmoud, J. Jiang and Y. M. Zhang, 'Effects of fault detection and isolation to the stability of fault-tolerant control systems,' Proc. of American Contr. Conf., 2676-81, 2001.
  • M. Mahmoud, J. Jiang and Y. M. Zhang, 'Optimal control law for fault-tolerant control systems in noisy environment,' Proc. of American Control Conf., pp. 2682-87, 2001.
  • Y. M. Zhang and J. Jiang, 'Fault-tolerant control system design with consideration of performance degradation,' Proc. of 2001 American Control Conference, pp. 2694-99, 2001.
  • Y. M. Zhang, J. Jiang, M. Flatley, and B. Hill, 'Condition monitoring and fault detection of a compressor using signal processing techniques,' Proc. of Am. Contr. Conf., pp. 4460-65, 2001.
  • Y. Zhang and J. Jiang, 'Design of Proportional-Integral Reconfigurable Control Systems via Eigenstructure Assignment,' Proc. of American Control Conference, pp. 3732-3736, 2000.
  • M. Mahmoud, J. Jiang and Y. Zhang, 'Stochastic Stability of Fault-Tolerant Control Systems in the Presence of Noise,' Proc. of American Control Conference, pp. 4294-4298, 2000.
  • M. Mahmoud, J. Jiang and Y. Zhang, 'Stochastic Stability of Fault-Tolerant Control Systems with System Uncertainties,' Proc. of American Control Conference, pp. 4284-4288, 2000.
  • Y. Xu, and J. Jiang, "Optimal Sensor Location in Closed-loop Control Systems for Fault Detection and Isolation," Proc. of American Control Conference, pp. 1195-1199, Chicago, IL U.S.A, June 28-30, 2000.
  • D. G. Michaelson, and J. Jiang, "Modelling of Redundancy in Multiple Mobile Robots," Proc. of American Control Conference, pp. 1083-1087, 2000.
  • M. Mahmoud, J. Jiang, and Y. Zhang, ‘Optimal control law for fault tolerant control systems,’ Proc. of the 39th IEEE Conf. on Decision and Control, Vol. 4, pp. 4126-4131, Sydney, NSW Australia, Dec. 12-15, 2000
  • G. Livanos, N. Ranganathan, and J. Jiang, ‘Heart sound analysis using the S transform,’ Conf. on Computers in Cardiology 2000, pp.587-590, Cambridge, MA U.S.A, Sep. 24-27, 2000
  • Y. Zhang and J. Jiang, 'Design of Integrated Fault Detection, Diagnosis and Fault-Tolerant Control Systems,' Proc. of 38th IEEE Conf. on Decision and Control, pp. 3587-3592, Phoenix, AZ, 1999.
  • Y. Zhang and J. Jiang, 'An Interacting Multiple Model Based Fault Detection, Diagnosis and Fault-Tolerant Control Approach,' Proc. of 38th IEEE Conf. on Decision and Control, pp. 3593-3598, Phoenix, AZ, 1999.
  • M. Mahmoud, J. Jiang and Y. Zhang, 'Analysis of Stochastic Stability for Fault-Tolerant Control Systems,' Proc. of the 38th IEEE Conf. on Decision and Control, pp. 3188-3193, Phoenix, AZ, 1999.
  • J. Jiang, and Qing Zhao, "Reconfigurable Control based on Imprecise Fault Identification," Proc. of American Control Conference, pp. 114-118, 1999.
  • Q. Zhao, J. Jiang, and Peter E. Orban, ‘Reliable servo system design with redundant sensors,’ Proc. of SPIE the 1998 Conf. on Sensors and Controls for Intelligent Machining, Agile Manufacturing, and Mechatronics, Vol. 3517, pp. 66-72, Boston, MA U.S.A, Nov 4-5 1998
  • J. Jiang, and Q. Zhao, 'Fault Tolerant Control System Synthesis using Imprecise Fault Identification and Reconfigurable Control,' Proceedings of A joint Conference on the Science and Technology of Intelligent Systems, pp. 169-174, Gaithersburg, MD, U.S.A., Sept. 14-17, 1998.
  • Y. Xu, and J. Jiang, 'Implementation of an observer-based Fault Detection Schemes on Lab-scale Power System,' Proc. of the 11th Canadian Conf. on Electrical and Computer Engineering, CCECE, Vol. 2 (of 2), pp. 573-576, Toronto, Canada, May 24-28, 1998.
  • Xin Zhang, and Jin Jiang, ‘Nonlinear excitation control in electrical power systems,’ Proc. of the 11th Canadian Conf. on Electrical and Computer Engineering, CCECE, Vol. 1 (of 2), pp. 229-232, Toronto, Canada, May 24-28, 1998.
  • Qing Zhao, Yifang Weng, and Jin Jiang, ‘Design of the reliable control system with multiple sensors,’ Proc. of the 11th Canadian Conf. on Electrical and Computer Engineering, CCECE, Vol. 1 (of 2), pp. 225-228, Toronto, Canada, May 24-28, 1998.
  • K. V. Patil, J. Jiang, and R. M. Mathur, ‘Three level binary voltage source inverter as static synchronous compensator,’ Proc. of the 11th Canadian Conf. on Electrical and Computer Engineering, CCECE, Vol. 2 (of 2), pp. 842-845, Toronto, Canada, May 24-28, 1998
  • K. V. Patil, R. M. Mathur, J. Jiang, and S. H. Hosseini, 'Dynamic Compensation of a Distribution System Using a New Binary Multilevel Voltage Source Inverter,' Preprint of CIGRE Regional Meeting, New Delhi, Sept. 10-11, 1997.
  • J. Jiang, and Q. Zhao, 'Should We Use Parameter Estimation or State Estimation Based FDI Algorithms?,' Preprint, Proc. of the IFAC Symposium on SAFEPROCESS'97, Vol. 1, pp. 474-479, Hull, U.K., August, 1997.
  • Q. Zhao, and J. Jiang, 'Reconfigurable Control System Synthesis using Bounding Parameter Estimation and Parametric Robust Control,' Preprint, Proc. of the IFAC Symposium on SAFEPROCESS'97, Hull, U.K. August, 1997.
  • Shogo Tanaka, Jin Jiang, and Teruyoshi Takesue, ‘A model-based adaptive algorithm for determination of time-of-flight in ultrasonic measurement,’ Proc. of the SICE Conference’97, pp. 965-970, Tokushima, Japan, July 29-31, 1997.
  • Qing Zhao, and Jin Jiang, ‘Reliable tracking control system design against actuator failures,’ Proc. of the SICE Conference’97, pp. 1019-1024, Tokushima, Japan, July 29-31, 1997.
  • J. Jiang, and Q. Zhao, ‘Comparison of Parameter and State Estimation based FDI Algorithms,' Preprints of 11th IFAC Symposium on System Identification, pp. 655-660, Kitakyushu, Japan, July, 1997.
  • Q. Zhao and J. Jiang, 'Reliable Control System Design Against Feedback Loop Failures with Applications to Aircraft Control,' Proc. of IEEE Conference on Control Application, pp. 994-999, Dearborn, MI, Sept., 1996.
  • Q. Zhao and J. Jiang, 'Robust damping control in power systems,’ Proceedings of the 4th IEEE Conference on Control Applications, pp. 227-232, Albany, U.S.A, Sept. 28-29, 1995
  • R. Harmsen and J. Jiang, 'Control of a Separately Excited DC Motor using On-line Linearization Techniques,' Proc. of American Control Conference, pp. 1879-1883, Baltimore, June 29-July 1, 1994.
  • J. Jiang, 'Fault Detection/Diagnosis and Controller Reconfiguration in Dynamic Systems,' Proc. of IFAC Symposium on Fault Detection Supervision and Safety for Technical Processes -SAFEPROCESS 94, pp. 81-86, Finland, June 13-16, 1994.
  • J. Jiang and F. Jia, 'A Robust Fault Diagnosis Scheme based on Signal Modal Estimation,' Proc. of The Second IEEE Conference on Control Applications, Sept. 13-16, 1993.
  • J. Jiang, 'Design and Implementation of an Optimal Gain Scheduling Controller for a Diesel Engine,' Proc. of The Second IEEE Conference on Control Applications, pp.667-672, Sept. 13-16, 1993.
  • J. Jiang, 'Generalized Gain Scheduling Control of a Diesel Engine based on H2 Optimization,' Proc. of American Control Conference, pp. 306-310, San Francisco, June 2-4, 1993.
  • J. Jiang, ‘Preservations of positive realness under discretizations,’ Proc. of American Control Conference, pp. 443-444, San Francisco, June 2-4, 1993.
  • J. Jiang, and R. Cook, ‘Fast parameter tracking RLS algorithm with high noise immunity,’ Proc. of American Control Conference, pp. 2315-2316, San Francisco, June 2-4, 1993.
  • F. Jia and J. Jiang, 'Fault Diagnosis in DC Servo Systems- A Comparative Study of Three Fault Diagnosis Schemes,' Proc. of International Conference on Fault Diagnosis, pp. 573-581,Toulouse, France, April 5-7, 1993.
  • R. Doraiswami, and J. Jiang, ‘A real-time expert control system status monitor using linear predictive coding algorithms,’ Proc. of the 30th Conf. on Decision and Control, pp. 2592-2597, Brighton, England, Dec., 1991.
  • J. Jiang, and R. Doraiswami, 'Selection of Optimal Monitoring Locations in Real-time Intelligent Reconfigurable Control Systems,' Proc. of 5th IEEE International Symposium on Intelligent Control, pp. 766-770, Philadelphia, U. S. A., Sept. 5-7, 1990.
  • R. Doraiswami, W. Liu, and J. Jiang, ‘Status monitoring in intelligent control systems using a linear predictive coding algorithm,’ Proc. of 5th Symposium on Intelligent Control, pp. 771-777, Philadelphia, U.S.A, Sept. 5-7, 1990.

Go to Top

 

 
All rights reserved. 2004-2005
Phone (519) 661-2111 Ext. 88320 Fax (519) 850-2436 E-mail jjiang@uwo.ca Office TEB 333
Electrical & Computer Engineering Faculty of Engineering
The University of Western Ontario London Ontario Canada N6A 5B9