Department of Mechanical & Materials Engineering Spencer Engineering Building, Room SEB 3061 Western University Tel: 519-661-3482 firstname.lastname@example.org
M. Farrokhnejad, A. Straatman, J. T. Wood, (2013), "A finite-volume model for numerical solidification of Mg Alloys", Materials Science Forum, volume 765, pages: 281-285.
M. Haghshenas, J. T. Wood, R. J. Klassen, (2012), "Effect of strain-hardening rate on the grain-to-grain variability of local plastic strain in spin-formed fcc metals", Materials Science and Engineering A, volume 552, pages: 376-383. http://dx.doi.org/10.1016/j.msea.2012.05.054
M. Haghshenas, J. T. Wood, and R. J. Klassen, (2012), “Investigation of strain-hardening rate on splined mandrel flow forming of 5052 and 6061 aluminum alloys”, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, volume 532, pages: 287-294. http://dx.doi.org/10.1016/j.msea.2011.10.094
M. Haghshenas, M. Jhaver, R. J. Klassen, J.T. Wood, et al. (2011), “Plastic strain distribution during splined-mandrel flow forming”, Materials and Design, volume 32, issue 6, pages, 3629-3636. http://dx.doi.org/10.1016/j.matdes.2011.02.014
M. N. Khan, M. Aljarrah, J. T. Wood, et al., (2011), “The effect of cooling rate on thermophysical properties of magnesium alloys”, Journal of Materials Research, volume 26, pages 974-982. http://dx.doi.org/10.1557/jmr.2011.24
Roy, M.J., Maijer, D.M., Klassen, R. J., Wood, J.T, Schost, E. (2010), “Analytical solution of the tooling/workpiece contact interface shape during a flow forming operation.”, Journal of Materials Processing Technology, volume 210, issue 14, pages 1976-1985. http://dx.doi.org/10.1016/j.jmatprotec.2010.07.011
J. S. Teixeira, J. T. Wood, (2009) “The effects of magnesium on the surface quality of AA6061 extrusions.”, Materials Science and Technology, volume 25, Issue 6, pages 770-776. http://dx.doi.org/10.1179/174328408X339099
J.P. Weiler and J.T. Wood, (2009) “Modeling fracture properties in a die-cast AM60B magnesium alloy I—Analytical failure model”, Materials Science and Engineering A, volume 527, Issue 1-2 , 25-31. http://dx.doi.org/10.1016/j.msea.2009.08.060
J.P. Weiler and J.T. Wood, (2009) “Modeling fracture properties in a die-cast AM60B magnesium alloy II – The effects of the size and location of porosity determined using finite element simulations”, Materials Science and Engineering A, volume 527, Issue 1-2, pages 32-37. http://dx.doi.org/10.1016/j.msea.2009.08.061
J.P. Weiler and J.T. Wood, (2012) “Predicting Mechanical Performance from Process Parameters in Cast Magnesium Alloys: A Review of the UWO Research Programme”, Submitted to Magnesium Alloys and their Applications Conference.
J.P. Weiler and J.T. Wood, 2012, “Strain-rate effects of sand-cast and die-cast Magnesium alloys under compressive loading”, Accepted by Magnesium Technology.
J.P. Weiler, J.T. Wood, and I. Basu, (2011) “Process-structure-property relationships for Magnesium alloys”, In-Press, THERMEC 2011 - International Conference on Processing and Manufacturing of Advanced Materials.
J.T. Wood, J.P. Weiler, and I. Basu, “Effect of Process Variables on Microstructural Features During Solidification of AM60B Magnesium Alloy”, In-Press, THERMEC 2011 - International Conference on Processing and Manufacturing of Advanced Materials
M. Medraj, M.N. Khan, M. Aljarrah and J.T. Wood, (2010), “Investigation of the solidification behavior of commercial Mg alloys through experiments and thermodynamic calculations”, CALPHAD 2010
J.P. Weiler, J.T. Wood, J. Jekl, R. Berkmortel, (2010) “Structure-Property relationships for die-cast Magnesium alloys”, Magnesium Technology 2010, Eds. S.R. Agnew, N.R. Neelameggham, E.A. Nyberg, and W.H. Sillekens, Warrendale, PA: The Minerals, Metals and Materials Society (TMS), 413-418.
T.P. Bruce and J. T. Wood, 2010 “Delamination Fracture Mechanisms of Continuous Fiber Polymer Composites Subjected to Mixed Mode Loading”, SAMPE Fall Technical Conference Proceedings: Multifunctional Materials: Working Smart Together, Memphis, TN, September 8-11, Society for the Advancement of Material and Process Engineering (SAMPE), CD-ROM.
Farroknehjad, M., Straatman, A.G., Wood, J.T., (2009), “A Volume-of-Fluid Based Numerical Simulation of Solidification in Mg Die-Casting on Fixed Non-uniform Colocated Grids”, The 17th Annual Conference of the CFD Society of Canada.
Farroknehjad, M., Straatman, A.G., Wood, J.T., (2009),” A CFD Study of Convective Cooling of a Cylinder Using a Perforated Helical Coil”, The 17th Annual Conference of the CFD Society of Canada.
Farroknehjad, M., Straatman, A.G., Wood, J.T., (2009), “A Volume-of-Fluid Based Numerical Simulation of Solidification in Binary Alloys on Fixed Non-uniform Colocated Grids”, The ASME 2009 International Manufacturing Science and Engineering Conference.
Jenkyn T.R., Arnold S., Wood J.T. (2010), “Curling Head for Curling Broom”, United States – Provisional. Canadian patent issued (2012).